Analogue for Tego SILIKOFTAL®non-stick 60 Silicone Non-stick Resin
Mar 4, 2025
Product Name: Silicone Non-stick Resin
Item No.: SilibaseSR-X660
Product category: Non-stick Resin Series
Dangerous Characteristics:
China Offset of Tego SILIKOFTAL®non-stick 60 Silicone Non-stick Resin with good adhesion.
SilibaseSR-X660 Silicone Non-stick Resin is not a dangerous product, but its solvent is a flammable liquid, which burns when exposed to heat or open flames.
Available extinguishing agents: carbon dioxide, foam, dry powder, 1211 fire extinguisher.
Product Features
Silicone Non-stick Resin Substitute Tego SILIKOFTAL®non-stick 60 Supplied by China SILIBASE SILICONE.SilibaseSR-X660 Silicone Non-stick Resin is a silicone modified resin, suitable for non-stick coatings. It has god heat resistance, water resistance, wear resistance, electrical insulation and adhesion, and can be completely compatible with modified inorganic nanometers. Mainly used for heat-resistant coatings, non-stick coatings, home appliance coatings and curtain wall panels, etc.;
Special Features
Substitute for Tego SILIKOFTAL®non-stick 60 Silicone Non-stick Resin.
particlarly good release of sugar containing baking goods
excellent dishwasher detergent resistance
good adhesion
without addition of organotin-containing compounds
Technical Data
Parameter Test Conditions Index
Exterior Visual inspection Colorless or light-yellow transparent liquid
Solvent PMA etc.
Solid content% 180℃，0.5h 60±2
Viscosity cps Rotational viscometer 300-800
Adhesion 100/100
Hot hardness 260℃ 2-3H
Above 260℃ H
Applications
Chinese Factory Supply Silicone Non-stick Resin similar to Tego SILIKOFTAL®non-stick 60.
release coatings for bakeware
release coatings for bakeware and non-stick coatings in combination with PTFE
decorative coatings of cookware, household appliances and electric and gas heaters with a permanent thermal stability of 250℃
garden shears, screws
Application formula recommendations; (For reference only)
SilibaseSR-X660 resin Titanium Dioxide 280℃
60°gloss meter 98 degrees
Resin solid content 40% 10min curing Hardness 5H
300℃ After 3h. Gloss 94 degrees
330℃ After 3h. Gloss 82 degrees
MEK 200 times Butanone tolerant
Precautions for Storage and Transportation:
If the solvent is found to volatilize, add the corresponding solvent to dilute and continue to use it. Store in a cool, ventilated warehouse below 30℃, avoid contact with acid and alkali, and keep away from fire and heat sources. There should be fire-fighting channels at the level of fire-fighting equipment, and handle with care when loading and unloading. Store and transport as dangerous goods.
Package:
25kg/sealed drum
200kg/sealed iron drum
